"AEGIS", the New Professional Optical Glass LCD Screen Protector from Giottos. The tempered optical glass is from "SCHOTT" Germany. AEGIS is optimized for most common Digital Cameras and Camcorders. We also provide special models that are uniquely shaped for Professional DSL cameras (Digital Single Lens Reflex) such as Canon, Nikon, Sony, Fujifilm, etc...
  • The Pro Optical Screen Protector is made from tempered glass:
    Thickness +/-0.05 mm; light transmission is 98% +.
  • The 12-layer AR Coating technology from "LEYBOLD" Germany protects the LCD from UV, improves the color quality and prolongs the life of the LCD.
  • Special Ultra Low Reflection Layers reduce light reflections and aberrations from the CCD.
  • The coatings reinforce the glass to withstand impact of up to 4kg/sq cm.
  • Thanks to the pre-attached 3M double sided tape it is easily applied. It is sealed and will prevent liquid, or dust from getting on the LCD display.
  • The AEGIS Pro Optical Screen Protector is resistant to acid and alkali which helps to prolong the life of the LCD.
  • Lies flat, no air bubbles and no diffraction patterns.
Cat. No.
Description
Diag. mm
Diag. inches
SP 8160 AEGIS Screen Protector 36.45 x 29.85 mm                                  
47.11
1.85
SP 8180 AEGIS Screen Protector 42.0 x 33.85 mm
53.94
2.12
SP 8181 AEGIS Screen Protector Canon EOS Rebel XT 47.8 x 54.9 mm
72.79
2.87
SP 8200 AEGIS Screen Protector  47 x 38.7 mm 
60.88
2.40
SP 8201 AEGIS Screen Protector Nikon D50 Top 38 x 21.6 mm Bottom 49.5 x 47.5 mm
 
 
SP 8202 AEGIS Screen Protector Nikon D70S Top 35.6 x 21 mm Bottom 49.8 x 46.8 mm
 
 
SP 8203 AEGIS Screen Protector Fuji FinePix S3 47.4 x 37.9 mm
60.69
2.39
SP 8204 AEGIS Screen Protector Canon EOS 1D,1DS,1D MarkII 47.17 x 66.15 mm
 
 
SP 8220 AEGIS Screen Protector 51.3 x 40.45 mm
65.33
2.57
SP 8250 AEGIS Screen Protector 53.9 x 41.7 mm
68.15
2.68
SP 8251 AEGIS Screen Protector 56.3 x 46.7 mm
73.15
2.88
SP 8252 AEGIS Screen Protector 56.6 x 45 mm
72.31
2.85
SP 8253 AEGIS Screen Protector Canon EOS 5D 57.1 x 47.4 mm
74.21
2.92
SP 8254 AEGIS Screen Protector Canon EOS 30D 55.5 x 46.7 mm
72.53
2.86
SP 8255 AEGIS Screen Protector Nikon D200 Top 49.8 x 24.9 mm Bottom 58.7 x 52.7 mm
 
 
SP 8256 AEGIS Screen Protector Canon EOS 1D Mark II N 59.5 x 68.25 mm
90.54
3.56
SP 8257 AEGIS Screen Protector Nikon D80 Top 38.4 x 22 mm Bottom 59.3 x 39.9 mm
 
 
SP 8258 AEGIS Screen Protector Canon EOS Rebel XTi 59.55 x 51 mm
78.40
3.09
SP 8259 AEGIS Screen Protector Sony A100 55.5 x 43.7 mm
70.68
2.78
SP 8270 AEGIS Screen Protector 60.8 x 48 mm
77.46
3.05
SP 8300 AEGIS Screen Protector 69.95 x 49.3 mm
70.65
2.78

How to remove the AEGIS protector from your camera

  Heat the edge of the glass with a hair dryer at a 5 CM (2") distance for about 30 seconds.
Do not overheat, and be cautious of not injuring your hand.		   Try to raise one corner with a finger, if it does not move, keep heating the glass while still trying to lift a corner at the same time.   Slowly raise one corner with your
finger and don't use a hard tool to avoid damage to the glass.		   Raise the whole glass slowly with your fingers.  Replace the glass protector.